User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Multicast Routing User Manual462
5. To refresh the page with the latest information on the switch, click the Refresh button.
The following table describes the nonconfigurable information that is displayed.
View the IPv6 MLD Groups
To view the IPv6 MLD groups:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
Table 177. IPv6 MLD Routing Interface Statistics
Field Description
Interface The interface for which data is to be displayed.
Querier Status Indicates whether the selected interface is an MLD querier or non-querier
on the subnet it is associated with.
Querier IP The address of the MLD querier on the IP subnet to which the selected
interface is attached.
Querier Up Time The time in seconds since the MLD interface querier was last changed.
Querier Expiry Time The time in seconds remaining before the other querier present timer
expires. If the local system is the querier
, this is zero.
Wrong Version Queries Received The number of queries received whose MLD version does not match the
MLD version of the interface.
Number of Joins Received The number of times a group membership was added on the selected
interface.
Number of Groups The current number of membership entries for the selected interface in the
cache table.