User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Multicast Routing User Manual464
View and Clear IPv6 MLD Traffic
To view and clear IPv6 MLD traffic:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Routing> IPv6 Multicast > MLD > MLD T
raffic.
5. T
o refresh the page with the latest information on the switch, click the Refresh button.
6. T
o clear all IPv6 MLD traffic, click the Clear button.
The following table describes the nonconfigurable information that is displayed.
Table 179. IPv6 Multicast MLD Traffic
Field Description
Valid MLD Packets Received The number of valid MLD packets received by the router.
Valid MLD Packets Sent The number of valid MLD packets sent by the router.
Queries Received The number of valid MLD queries received by the router.
Queries Sent The number of valid MLD queries sent by the router.
Reports Received The number of valid MLD reports received by the router.
Reports Sent The number of valid MLD reports sent by the router.