User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual47
The following table describes the USB Directory Details information.
Configure and View Information About Slots and Port
Cards
You can configure information about the port cards that are installed in the switch’s slots and
view information about the port cards and other switches that are compatible with the switch.
To configure and view information about slots and port cards:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System > Management > Slot Information.
The previous figure does not show all columns on the page.
Note: In the previous example for model M4300-96X, a third-party HDMI port
card is shown in slot 1/5.
You can insert a third-party HDMI port card in
any of the upper slots (1–6), but not in the lower slots.
Table 14. USB Directory Details information
Field Description
File Name The name of the file stored in the USB flash drive.
File Size The size of the file stored in the USB flash drive in bytes
Modification Time The last modification time of the file stored in the USB flash drive.