User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Quality of Service User Manual472
Configure Global CoS Settings
To configure global CoS settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select QoS> CoS > Basic > CoS Configuration.
Note: You can also navigate to this page by selecting QoS >
CoS >
Advanced > CoS Configuration.
5. Use Global to specify all CoS configurable interfaces.
The option Global represents the most recent global configuration settings.
6. Use Interface to specify CoS configuration settings based per-interface.
7. Use Global T
rust Mode to specify whether to trust a particular packet marking at ingress.
Global Trust Mode can be one of the following:
• untrusted
• trust dot1p
• trust ip-dscp
The default value is trust dot1p.
8. Use Interface T
rust Mode to specify whether to trust a particular packet marking at ingress.
Interface Trust mode can be one of the following:
• untrusted
• trust dot1p
• trust ip-dscp