User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual48
5. For model M4300-96X only, from the Administrative State menu, select Enable or
Disable.
By default, all slots are enabled, but you can select to disable a slot.
6. For model M4300-96X only
, from the Configured Card Model ID menu, select the port
card.
This option allows you to preconfigure the port card before you insert the port card.
7. For model M4300-96X, if you changed the settings, click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information in the Slot Configuration
table.
Field Description
Slot The unit and slot number.
Status Indicates whether the slot is empty or full.
Power State For model M4300-96X only, the power state is always Enable.
For other models, the Power State column does not display.
Card Information
Configured/Actual
The model of the configured port card and the model of the port card that is
inserted in the slot.
Card Description
Configured/Actual
The description of the configured port card and the description of the port card that
is inserted in the slot.
Card Power Down If the value is True, the power state can be administratively enabled or disabled. If
the value is False, the power state cannot be configured.
PoE Capable Indicates whether the port card is PoE-capable.
Serial Number The serial number of the installed port card.
Vendor Name The vendor name of the installed port card.
Manufacturer Name The manufacturer name of the installed port card.
FPGA Version The FPGA (Field Programmable Gate Array) version of the installed port card.
Software Version The software version of the installed port card.
Board Revision ID The board revision ID of the installed port card.
Product Name The product name of the installed port card.
Product Description The detailed product description of the installed port card.