User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Quality of Service User Manual484
To configure the global DiffServ mode:
1. Launch a web browser.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select QoS > DiffServ >
Advanced > Diffserv Configuration.
5. Select the administrative mode for Dif
fServ:
• Enable. Dif
ferentiated Services are active.
• Disable.
The DiffServ configuration is retained and can be changed, but it is not
active.
6. Click the Apply button.
Your settings are saved.
The following table describes the information displayed in the Status table on the DiffServ
Configuration page.
Table 185. DiffServ Status
Field Description
Class Table The number of configured DiffServ classes out of the total allowed on
the switch.
Class Rule table The number of configured class rules out of the total allowed on the
switch.