User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual510
Configure RADIUS Accounting Servers
To configure a RADIUS accounting server:
1. Launch a web browser.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security > Management Security > RADIUS >
Accounting Server Configuration.
5. In the Accounting Server IP
Address field, specify the IP address of the RADIUS
accounting server.
6. In the Accounting Server Name field, enter the name of the accounting server
.
7. In the Port field, specify the UDP port number the server uses to verify the RADIUS
accounting server
.
The valid range is 0–65535. If the user has read-only access, the value is displayed but
cannot be changed.
8. From the Secret Configured list, select Ye
s to add a RADIUS secret in the next field.
After you add the RADIUS accounting server, this field indicates whether the shared
secret for this server is configured.
9. In the Secret field, type the shared secret to use with the specified accounting server
.
10. From the Accounting Mode list, enable or disable the RADIUS accounting mode.
11. Click the Apply button.
Your settings are saved.