User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual514
The range is 1–30.
10. Click the Add button.
The server is added to the switch.
Configure Authentication Lists
The switch supports various authentication lists.
Configure a Login Authentication List
A login list specifies the authentication methods to be used to validate switch or port access
for the users associated with the list. The preconfigured users, admin and guest, are
assigned to a preconfigured list named defaultList, which you cannot delete. All newly
created users are also assigned to the defaultList until you specifically assign them to a
different list.
Two default lists are present: DefaultList and networkList.
To configure a login authentication list:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security > Management Security >
Authentication List > Login Authentication
List.
5. T
o create a new login list, enter the name in the List Name field.
The name can be up to 15 alphanumeric characters long and is not case-sensitive.
6. In the columns in table header (1, 2, 3, 4, 5, 6), select the method to appear first in the
selected authentication enable list.