User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual517
5. Select the check box for the dot1x list name.
6. Select the method to appear first in the selected authentication login list.
The options are as follows:
• IAS.
The user’s ID and password in internal authentication server database is used
for authentication.
• Local.
The user’s locally stored ID and password are used for authentication.
• RADIUS.
The user’s ID and password are authenticated using the RADIUS server
instead of locally.
• None.
The user authenticated without a user name and password.
7. Click the Apply button.
Your settings are saved.
Configure an HTTP Authentication List
You can configure an HTTP list. An HTTP list specifies the authentication methods to
validate the switch or port access through HTTP.
To configure an HTTP authentication list:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.