User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual521
Manage HHTP, HTTPS, and SSH Access
You can configure HTTP and Secure HTTP access to the switch’s management interface.
Configure HTTP Server Settings
To access the switch using a web browser, you must first configure it with IP information (IP
address, subnet mask, and default gateway). You can configure the IP information using any
of the following:
• BOOTP
• DHCP
• T
erminal interface through the EIA-232 port
Once you establish in-band connectivity, you can change the IP information using a
web-based management.
To configure the HTTP server settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security >
Access> HTTP > HTTP Configuration.
5. Select the HTTP Access Disable or Enable radio button.