User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual532
For information about creating an enable authentication list, see Configure a Login
Authentication List on page 514.
To configure the Telnet authentication list:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security >
Access > Telnet.
5. From the Login Authentication
List menu, select which authentication list must be used to
log in through Telnet.
The default value is networkList.
6. From the Enable Authentication
List menu, select which authentication list must be used
to log in through Telnet for the privileged EXEC mode.
The default value is enableList.
7. Click the Apply button.
Your settings are saved.