User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual535
5. Next to Allow new telnet sessions, select the Disable or Enable radio button.
This specifies whether the new outbound Telnet session is enabled or disabled. The
default value is Enabled so that new outbound
Telnet sessions can be established until
there are no more sessions available. If it is disabled, no new outbound Telnet sessions
are established. An established session remains active until the session is ended or an
abnormal network error ends the session.
6. In the Session T
imeout field, specify how many minutes of inactivity occur on an inbound
Telnet session before the session is logged off.
You can enter any number from 1 to 160. The factory default is 5 minutes.
7. In the Maximum Number of Sessions field, specify how many simultaneous inbound
T
elnet sessions are allowed.
The maximum is 5, which is also the factory default.
8. Click the Apply button.
Your settings are saved.
The Current Number of Sessions field displays the number of current outbound
Telnet
sessions.