User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual536
Configure Console Port Access
To configure the console port:
1. Launch a web browser.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security >
Access > Console Port.
5. In the Serial Port Login T
imeout (minutes) field, specify how many minutes of inactivity
occur on a serial port connection before the switch closes the connection.
Enter a number between 0 and 160. The factory default is 5. Entering 0 disables the
time-out.
6. In the Baud Rate (bps) list, select the default baud rate for the serial port connection.
You can choose from 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200 baud.
The factory default is 1
15200 baud.
7. In the Login Authentication List list, select which authentication list to use when you log in
through Telnet.
The default value is defaultList.
8. In the Enable Authentication
List list, select which authentication list to use when going
into the privileged EXEC mode.
The default value is enableList.