User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual537
9. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information that is displayed.
Configure Denial of Service Settings
To configure Denial of Service settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security >
Access > Denial of Service Configuration.
Table 197. Console Port
Field Description
Character Size (bits) The number of bits in a character. This is always 8.
Flow Control Whether hardware flow control is enabled or disabled. It is always
disabled.
Stop Bits The number of stop bits per character. It is always 1.
Parity The parity method used on the serial port. It is always None.