User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual540
21. Select the Denial of Service UDP Port Disable or Enable radio button.
Enabling UDP Port DoS prevention causes the switch to drop packets with UDP source
port equal to UDP destination port.
The factory default is Disable.
22. Click the Apply button.
Your settings are saved.
Configure Access Control Settings
You can configure an access control profile and associate an access control rule with the
profile. The switch supports one access control profile only.
To complete set up a profile with a rule, follow the procedures that are described in the
following sections:
1. Configure an Access Control Profile on page 540
2. Configure Access Rule Settings for the Access Control Profile on page 542
Configure an Access Control Profile
To configure the access profile settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security
> Access > Access Control > Access Profile Configuration.