User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual558
Convert Learned MAC Addresses to Static Addresses
You can convert a dynamically learned MAC address to a statically locked address.
To convert learned MAC addresses and view the learned MAC addresses for an
interface:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security > T
raffic Control > Port Security > Dynamic MAC Address.
5. Select the Convert Dynamic
Address to Static check box to convert a dynamically learned
MAC address to a statically locked address.
The dynamic MAC address entries are converted to static MAC address entries in a
numerically ascending order until the static limit is reached.
6. Click the Apply button.
Your settings are saved.
7. From the Port List menu, select the physical interface.