User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual564
Configure Private VLAN Association Settings
To configure private VLAN association:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security > T
raffic Control > Private VLAN > Private VLAN Association
Configuration.
5. Use Primary VLAN to select the primary VLAN ID of the domain.
This is used to associate secondary VLANs with the domain.
6. Use Secondary VLAN(s) to display all the statically created VLANs (excluding the primary
and default VLANs).
This control is used to associate VLANs with the selected primary VLAN.
7. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information displayed on the page.
Table 205. Private VLAN Association
Field Description
Isolated VLAN The isolated VLAN associated with the selected primary VLAN.
Community VLAN(s) The list of community VLANs associated with the selected primary
VLAN.