User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual574
5. To configure a static binding, specify the following:
a. From the Interface menu, select the interface.
b. In the MAC Address field, specify the MAC address that must be added for the
binding entry
.
This is the key to the binding database.
c. From the VLAN ID menu, select the VLAN for the binding rule.
The range of the VLAN ID is 1 to 4093.
d. In the IP Address field, specify a valid IP address for the binding rule.
e. Click the Add button.
The DHCP snooping binding entry is added into the database.
View the Dynamic DHCP Snooping Bindings
To view the dynamic DHCP snooping bindings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security > Control > DHCP Snooping > Binding Configuration.