User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual575
The following table describes the fields of the Dynamic Binding Configuration table.
Configure Snooping Persistent Settings
To configure snooping persistent settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security > Control > DHCP Snooping > Persistent Configuration.
5. Select the Store Local or Remote radio button.
Selecting Local disables the remote fields Remote File Name and Remote IP
Address.
6. If you select the Remote radio button, do the following:
a. In the Remote IP
Address field, type the remote IP address on which the snooping
database is stored.
b. In the Remote File Name field, enter the remote file name to store the database.
Table 208. Dynamic DHCP Bindings
Field Description
Interface The interface on which the dynamic binding was learned.
MAC Address The learned MAC address for the binding.
VLAN ID The VLAN ID that corresponds to the binding.
IP Address The IP address that corresponds to the binding.
Lease Time The remaining lease time for the binding.