User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual591
Add a Captive Portal Instance
By default, the switch has one captive portal. You can change the settings for that captive
portal, and you can also create and configure up to nine additional portals.
To add a captive portal instance:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security > Control > Captive Portal > CP Configuration.
5. In the CP Name field, enter the name of the configuration.
The name can contain 1 to 31 alphanumeric characters.
6. In the Admin Mode list, select Enable or Disable.
This sets the administrative mode of the captive portal feature. By default captive portal is
disabled.
Configured Local Users The number of local users configured.
Authenticated Users Shows the number of users currently authenticated to all captive portal
instances on this switch.
Table 213. Captive Portal Global Configuration (continued)
Field Description