User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual594
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security > Control > Captive Portal > CP Binding Configuration.
5. Select the CP ID from the list.
The ID is a unique value that identifies the captive portal instance. This value is
automatically assigned to the instance when it is created and cannot be changed.
6. In the CP Name field, specify the name of the configuration.
The name can contain from 1 to 31 alphanumeric characters.
7. Click one or more interfaces.
The interfaces are selected.
8. Click the Apply button.
Your settings are saved.
View the Captive Portal Binding Table
To view the captive portal binding table:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security > Control > Captive Portal > CP Binding T
able.