User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual623
3. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security >
ACL > Advanced > IPv6 Rules.
If no rules exists, the IPv6 ACL Rule Table shows the message No rules have been
configured for this
ACL. If one or more rule exists for the ACL, the rules display in the
IPv6 ACL Rule Table.
5. From the ACL Name menu, select the IPv6
ACL for which you want to add or a change a
rule.
6. T
ake one of the following actions:
• T
o add an IPv6 ACL rule, click the Add button.
• T
o change an existing rule, click the rule hyperlink in the Sequence Number column
of the IPv6 ACL Rule Table.
7. Configure the following options for the rule:
• Sequence Number. Enter a whole number in the range of 1 to 2147483647.
This
number is used to identify the rule. An IPv6 ACL can contain up to 1023 rules.