User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual629
7. Specify an optional Sequence Number to indicate the order of this access list relative to
other access lists already assigned to this interface and direction.
A low number indicates high precedence order. If a sequence number is already in use
for this interface and direction, the specified access list replaces the currently attached
access list using that sequence number
. If you do not specify the sequence number
(meaning that the value is 0), a sequence number that is one greater than the highest
sequence number currently in use for this interface and direction is used. The valid range
is 1–4294967295.
8. From the Unit 1, Unit 2, Unit 3, and LAG switch figures onscreen, select the ports and
LAGs to which the rule must apply
.
If a port or LAG is not selected, click the port or LAG to select it. If a port or LAG is
selected, click the port or LAG to clear it again.
9. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information displayed on the page.
View and Delete IP ACL Bindings in the IP ACL Binding
Table
To view and delete IP ACL bindings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
Table 219. IP Binding Configuration
Field Description
Interface Displays the selected interface.
Direction Displays the selected packet filtering direction for the ACL.
ACL Type The type of ACL assigned to the selected interface and direction.
ACL ID/Name The ACL number (in the case of IP ACL) or ACL name (in the case of
named IP
ACL and IPv6 ACL) identifying the ACL assigned to selected
interface and direction.
Sequence Number The sequence number signifying the order of specified ACL relative to
other
ACLs assigned to selected interface and direction.