User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Monitor the Switch and Network User Manual651
5. In the Host Configuration section, configure the following settings:
• From the IP Address
Type menu, select the address type of host.
- IPv4
- IPv6
- DNS
• In the Host Address field, specify the address of the host configured for the syslog.
• In the Port field, specify the port on the host to which syslog messages are sent.
The default port is 514.
• Select the severity option in the Severity Filter list.
A log records messages equal to or above a configured severity threshold. These
severity levels are available:
- Emergency (0).
The system is unusable
- Alert (1).
Action must be taken immediately
- Critical (2). Critical conditions
- Error (3). Error conditions
- Warning (4). W
arning conditions
- Notice (5). Normal but significant conditions
- Informational (6). Informational messages
- Debug (7). Debug-level messages
6. Click the Apply button.
Your settings are saved.