User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Monitor the Switch and Network User Manual655
Globally Configure Multiple Port Mirroring
To globally configure multiple port mirroring:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Monitoring > Mirroring > Multiple Port Mirroring.
5. Select the number of the port mirroring session ID from the Session ID list.
The number of
sessions allowed is platform specific.
6. Select the
Administrative Mode for the selected port mirroring session using the True
(enabled) or False (disabled) radio button.
Select the T
rue option to enable Admin mode for the selected session. When a particular
session is enabled, any traffic entering or leaving the source ports of the session is
copied (mirrored) onto the corresponding destination port or a remote switched port
analyzer (RSPAN) VLAN. By default, Admin mode is disabled (False). If the mode is
False (disabled), the configured source is not mirroring traffic to the destination.
7. From the Destination Port list, select the destination interface to which port traf
fic is to be
copied.
You can configure only one destination port on the system. It acts as a probe port and
receives traf
fic from all configured source ports. If the value is not configured, it is shown
as None. The default value is None.