User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Monitor the Switch and Network User Manual658
If the VLAN is configured as the source VLAN, its direction is displayed as a blank
field.
8. Click the Apply button.
Your settings are saved.
The settings are applied to the system. If the port is configured as a source port, the
Mirroring Port field value is Mirrored.
The Status field indicates the interface status.
Note: If an error dialog includes multiple error messages, resolve the first
error messages to be able to view the remaining errors messages.
Manage an RSPAN VLAN
You can configure the VLAN to use the remote switched port analyzer (RSPAN) VLAN.
RSPAN allows you to mirror traffic from multiple source ports (or from all ports that are
members of a VLAN) from different network devices and send the mirrored traffic to a
destination port (a probe port connected to a network analyzer) on a remote device. The
mirrored traffic is tagged with the RSPAN VLAN ID and transmitted over trunk ports in the
RSPAN VLAN.
Configure an RSPAN VLAN
To configure an RSPAN VLAN:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Monitoring > Mirroring > RSP
AN VLAN.