User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Maintenance and Troubleshooting User Manual671
Save the Configuration
When you save the configuration, changes that you made are retained by the switch when it
is rebooted. You can manually save the configuration or you can set up autosave.
To save the configuration:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Maintenance > Save Config > Save Configuration.
5. Select the check box.
6. Click the Apply button.
Your settings are saved.
If you restart the switch, the saved settings are retained.
Configure Auto Save Mode
To configure auto save mode:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.