User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Maintenance and Troubleshooting User Manual673
3. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Maintenance > Reset > Factory Default.
5. Select the check box.
6. Click the Apply button.
A confirmation pop-up window opens.
7. Click Ye
s to confirm.
All configuration parameters are reset to their factory default values. All changes you
made are, even if you issued a save.
Reset All User Passwords to Their Default
Settings
To reset all user passwords to their default settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Maintenance > Reset > Password Reset.
5. Select the check box.