User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Maintenance and Troubleshooting User Manual675
• Buffered Log. Specify Buffered Log to retrieve the system buffered (in-memory) log.
• Tech Support. Specify
Tech Support to retrieve the switch information needed for
trouble-shooting.
• Crash Logs. Specify Crash Log to retrieve the crash logs.
• Backup Configuration. Specify Backup Configuration in text mode to retrieve the
stored backup configuration.
• CPU Packets Capture File. Specify CPU Packets Capture File to retrieve the stored
captured CPU packets.
• Factory Default Configuration. Specify Factory Default Configuration in text mode
to retrieve the stored factory default configuration.
The factory default is CLI Banner.
6. Use T
ransfer Mode to specify what protocol to use to transfer the file:
• TFTP.
Trivial File Transfer Protocol
• SFTP. Secure File
Transfer Protocol
• SCP. Secure Copy Protocol
• FTP. File
Transfer Protocol
7. Use Server Address
Type to specify either IPv4, IPv6, or DNS to indicate the format of the
Server Address field. The factory default is IPv4.
8. Use Server Address to enter the IP address of the server in accordance with the format
indicated by the seer address type.
The factory default is the IPv4 address 0.0.0.0.
9. Use Remote File Path to enter the path to upload the file.
File path can include alphabetic, numeric, forward slash, dot or underscore characters
only
. You can enter up to 160 characters. The factory default is blank.
10. Use Remote File Name to enter the name of the file to download from the server. You can
enter up to 32 characters.
The factory default is blank.
11. Use Local File Name to specify the local script file name to upload.
Note: This field is visible only when File Type is Script File.
12. Use User Name to enter the user name for remote login to the SFTP/SCP server where the
file is sent.
Note: This field is visible only when the SFTP or SCP transfer mode is
selected.
13. Use Password to enter the password for remote login to SFTP/SCP server where the file is
sent.