User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Maintenance and Troubleshooting User Manual676
Note: This field is visible only when the SFTP or SCP transfer mode is
selected.
14. Click the Apply button.
The file is uploaded. The last row of the table displays information about the progress of
the file transfer
.
Upload a File Using HTTP
To use HTTP file upload:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Maintenance > Export > HTTP File Export.
5. Use File T
ype to specify what type of file to upload:
• CLI Banner. Specify CLI Banner to retrieve the CLI banner file.
• Text Configuration. Specify configuration in text mode to retrieve the stored
configuration.
• Script File. Specify Script file to retrieve the stored configuration.
• Error Log. Specify Error log to retrieve the system error (persistent) log, sometimes
referred to as the event log.
• Trap Log. Specify
Trap log to retrieve the system trap records.
• Buffered Log. Specify buf
fered log to retrieve the system buffered (in-memory) log.
• Tech Support. Specify
Tech Support to retrieve the switch information needed for
troubleshooting.
• Crash Logs. Specify Crash Logs to retrieve the system crash logs.
• Backup Configuration. Specify Backup Configuration in text mode to retrieve the
stored backup configuration.