User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual68
13. Use the Offset Hours field to specify the number of hours of difference from UTC.
The allowed range is –12 to 13. The default value is 0.
14. Use the Offset Minutes field to specify the number of minutes of dif
ference from UTC.
The allowed range is 0 to 59. The default value is 0.
15. Click the Apply button.
Your settings are saved.
View SNTP Global Status
When you select the SNTP option as the Clock Source, the SNTP global status is displayed
below the SNTP Global Configuration section of the page.
To view SNTP global status:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System > Management > Time > Time Configuration > SNTP Global Status
5. Select the SNTP option as the Clock Source.
The SNTP Global Status is displayed below the SNTP Global Configuration section.