User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Maintenance and Troubleshooting User Manual680
9. Use Transfer Mode to specify what protocol to use to transfer the file:
• TFTP.
Trivial File Transfer Protocol
• SFTP. Secure File
Transfer Protocol
• SCP. Secure Copy Protocol
• FTP. File
Transfer Protocol
10. Use Server Address
Type to specify either IPv4, IPv6, or DNS to indicate the format of the
TFTP/SFTP/SCP Server Address field.
The factory default is IPv4.
11. Use Server Address to enter the IP address of the
TFTP server in accordance with the
format indicated by the server address type, for example an IP address in the x.x.x.x format.
The factory default is the IPv4 address 0.0.0.0.
12. Use Remote File Path to enter the path of the file to download.
The file path cannot include the following symbols: ' \:*?”<>| '. Up to 160 characters can
be entered.
The factory default is blank.
13. Use Remote File Name to enter the name of the file to download from the server.
The file path cannot include the following symbols: ' \:*?”<>| '. You can enter up to 32
characters.
The factory default is blank.
14. Use User Name to enter the user name for remote login to SFTP/SCP server where the file
resides.
Note: This field is visible only when the SFTP or SCP transfer mode is
selected.
15. Use Password to enter the password for remote login to SFTP/SCP server where the file
resides.
Note: This field is visible only when the\ SFTP or SCP transfer mode is
selected.
16. Click the Apply button.
The file is downloaded. The last row of the table displays information about the progress
of the file transfer
. It is displayed only after the process starts. The page refreshes
automatically until the file transfer completes.
Download a File to the Switch Using HTTP
You can download files of various types to the switch using an HTTP session (for example,
through your web browser).
For you to able to download SSH key files, SSH must be administratively disabled and no
active SSH sessions must occur.