User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Maintenance and Troubleshooting User Manual683
If the file has errors, the update is stopped. The factory default is Software.
6. Use Image Name to select one of the images from the list:
• Image1. Select image1 to download to image1.
• Image2. Select image2 to download to image2.
Only when File Type Software is selected is the Image Name field visible.
7. Use the File Path field to give a path for the file to download.
You can enter up to 146 characters. The default is blank.
8. Use USB File to give a name along with path for the file to download.
You can enter up to 32 characters. The factory default is blank.
9. Click the Apply button.
The download begins. The Download Status field displays the status of the file transfer to
the switch.
The last row of the table is used to display information about the progress of
the file transfer. It is displayed only after the process starts. The page refreshes
automatically until the file transfer completes.
Manage Software Image Files
The system maintains two versions of the switch software image in permanent storage. One
image is the active image, and the second image is the backup image. The active image is
loaded during subsequent switch restarts. This feature reduces switch down time when you
are upgrading or downgrading the switch software.
Copy an Image
To copy an image:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Maintenance > File Management > Copy.