User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Maintenance and Troubleshooting User Manual690
5. Use IP Address/Hostname to enter the IP address or host name of the station to which you
want to discover a path.
The default value is blank.
6. Enter the number of Probes Per Hop.
The default value is 3. The range is 1 to 10.
7. Enter the Maximum TTL for the destination.
The default value is 30. The range is 1 to 255.
8. Enter the Initial TTL to be used.
The default value is 1. The range is 1 to 255.
9. Enter the Maximum Failures allowed in the session.
The default value is 5. The range is 1 to 255.
10. Interval (secs). Enter the time between probes in seconds.
The default value is 3. The range is 1 to 60.
11. Enter the UDP Destination Port in probe packets.
The default value is 33434. The range is 1- 65535.
12. Enter the Size of the probe packets.
The default value is 0. The range is 0 to 39936.
13. Enter the Source IP address or interface to use when sending the echo request packets.