User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual73
Configure Daylight Saving Time Settings
To configure the Daylight Saving Time settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System > Management > T
ime > Daylight Saving Configuration.
Last Attempt Status The status of the last S9 NTP request to this server. If no packet was
received from this server, a status of Other is displayed.
• Other. None of the following enumeration values.
• Success. The
SNTP operation was successful and the system
time was updated.
• Request Timed Out.
A directed SNTP request timed out without
receiving a response from the SNTP server.
• Bad Date Encoded.
The time provided by the SNTP server is not
valid.
• Version Not Supported.
The SNTP version supported by the
server is not compatible with the version supported by the client.
• Server Unsynchronized. The
SNTP server is not synchronized
with its peers. This is indicated through the leap indicator field on
the SNTP message.
• Server Kiss Of Death. The
SNTP server indicated that no further
queries were to be sent to this server. This is indicated by a
stratum field equal to 0 in a message received from a server.
Requests The number of SNTP requests made to this server since last agent
reboot.
Failed Requests The number of failed SNTP requests made to this server since last
reboot.
Table 21. SNTP Server Status (continued)
Field Description