User Manual

Table Of Contents
M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual79
5. Use one of the following methods to select an interface:
In the Go T
o Interface field, enter the interface in the unit/slot/port format and click on
the Go button.
Next to the Interface column, select the check box for the interface that you want to
configure
6. From the Configured Mode menu, select Enable or Disable.
The default is Enable.
7. Click the Apply button.
Your settings are saved.
The Operational Mode field shows whether PTP is enabled or disabled for an interface.
Configure DNS Settings
You can configure information about DNS servers that the network uses and how the switch
operates as a DNS client.
Configure Global DNS Settings
You can configure global DNS settings and DNS server information.
To configure the global DNS settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System > Management > DNS > DNS Configuration.