User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual89
Configure Green Ethernet Remote Device Details
To configure the Green Ethernet remote device information:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System
 Management  Green Ethernet  Green Ethernet Details.
The Green Ethernet Details page displays.
5. Scroll down to the Remote Device Information section.
6. Select the Interface.
Rx_dll_enabled Status of the EEE capability negotiation on the local system.
Rx_dll_ready Data Link Layer ready: This variable indicates that the rx system
initialization is complete and is ready to update/receive LLDPDU containing
EEE TL
V.
Time Since Counters Last Cleared Time Since Counters Last Cleared (since the time of power up, or after
EEE counters are cleared).
Table 28. Green Ethernet Local Device information (continued)
Field Description