User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual94
Configure and Display Bonjour Settings
A Mac OS device that supports Bonjour can discover the switch in the network so that you
can find the switch IP address and log in to the local browser UI of the switch. Bonjour is
enabled by default. You can disable Bonjour for security reasons.
Enable or Disable Bonjour
To enable or diable Bonjour:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System > Management > Bonjour > Bonjour Configuration.
The Bonjour Global Configuration page displays.
5. Select one of the following radio buttons:
• Enable. Bonjour is enabled.
This is the default setting.
• Disable. Bonjour is disabled.
6. Click the Apply button.
Your settings are saved.
Percentage Time spent in LPI
mode since last sample
Percentage of time spent in LPI mode during the current measurement
interval.
Percentage Time spent in LPI
mode since last reset
Percentage of time spent in LPI mode since EEE LPI statistics were
reset.
Table 33. Interface Green mode EEE LPI History
Field Description