User Manual
Table Of Contents
- 8-Port and 16-Port Gigabit Ethernet Plus Click Switch
- Contents
- 1 Get Started
- 2 Network Settings
- 3 Optimize Performance With Quality of Service
- 4 Use VLANS for Traffic Segmentation
- VLAN Overview
- Create a Basic Port-Based VLAN
- Assign Ports to Multiple VLAN Groups
- Create 802.1Q-Based VLANs in a Basic Configuration
- Create 802.1Q-Based VLANs in an Advanced Configuration
- Add Tagged or Untagged Ports to an 802.1Q-Based VLAN
- Specify a Port PVID for an 802.1Q-Based VLAN
- Manage the Voice VLAN
- 5 Manage and Monitor the Switch
- Manage Flow Control
- Manage the Port Speed
- Specify a Port Description
- Enable Loop Detection
- Control the Port LEDs
- Enable the Power Saving Mode
- Change the Switch Management Mode
- Manage Access Control
- Upgrade the Firmware
- Reboot the Switch
- Save the Switch Configuration
- Restore a Saved Switch Configuration
- Restore Factory Default Settings
- Enable Port Mirroring
- View Switch Information or Change the Switch Device Name
- View Port Statistics
- 6 Manage Power over Ethernet
- 7 Diagnostics and Troubleshooting
- A Supplemental Information
8-Port and 16-Port Gigabit Ethernet Plus Click Switch
User Manual3
(continued)
202-11690-03
(continued)
October 2018
(continued)
• Changed Access the Switch With the ProSAFE Plus Configuration Utility
and the subsections.
• Added Use the NETGEAR Switch Discovery Tool to Access the Switch.
• Changed Register Your Product.
• Changed View Switch Information or Change the Switch Device Name.
• Changed Add Devices to the Access Control Table.
• Added PoE Troubleshooting Suggestions for Model GSS108EPP.
• Removed references to the resource CD.
• Made multiple minor changes.
202-11690-02 January 2017 Made a minor change to Enable Port Mirroring.
202-11690-01 December 2016 Initial publication.