User Manual
Table Of Contents
- 8-Port and 16-Port Gigabit Ethernet Plus Click Switch
- Contents
- 1 Get Started
- 2 Network Settings
- 3 Optimize Performance With Quality of Service
- 4 Use VLANS for Traffic Segmentation
- VLAN Overview
- Create a Basic Port-Based VLAN
- Assign Ports to Multiple VLAN Groups
- Create 802.1Q-Based VLANs in a Basic Configuration
- Create 802.1Q-Based VLANs in an Advanced Configuration
- Add Tagged or Untagged Ports to an 802.1Q-Based VLAN
- Specify a Port PVID for an 802.1Q-Based VLAN
- Manage the Voice VLAN
- 5 Manage and Monitor the Switch
- Manage Flow Control
- Manage the Port Speed
- Specify a Port Description
- Enable Loop Detection
- Control the Port LEDs
- Enable the Power Saving Mode
- Change the Switch Management Mode
- Manage Access Control
- Upgrade the Firmware
- Reboot the Switch
- Save the Switch Configuration
- Restore a Saved Switch Configuration
- Restore Factory Default Settings
- Enable Port Mirroring
- View Switch Information or Change the Switch Device Name
- View Port Statistics
- 6 Manage Power over Ethernet
- 7 Diagnostics and Troubleshooting
- A Supplemental Information
8-Port and 16-Port Gigabit Ethernet Plus Click Switch
Supplemental Information User Manual76
Technical Specifications
The technical specification differ for each model.
Technical Specifications Model GSS108E
Port-based VLANs Disabled
802.1Q VLANs Disabled
Voice VLAN • 1. Voice VLAN ID
• 6. Class Of Service
• Disabled. Port voice VLAN mode
Note: The voice VLAN is supported on switch model GSS108EPP, but it
is not supported on switch models GSS108E and GSS116E.
QoS 802.1p/DSCP based
Rate limiting Disabled
Broadcast filtering Disabled
Table 4. Technical specifications model GSS108E
Specification Value or Description
Network interfaces RJ-45 connectors supporting 10BASE-T, 100BASE-TX, or 1000BASE-T
Network cable Category 5e (Cat 5e) or better Ethernet cable
Ethernet ports 8
USB ports (provides power
only)
2
USB power 10W maximum per port, 15W maximum total
USB max current Up to 1.5A maximum on a single port, not to exceed 2A total across both ports
Power 100–240 VAC 50/60 Hz, 1.0A maximum
Power consumption 20.14W maximum
Weight 0.43 kg (0.94 lb)
Dimensions (W X D x H) 305 mm x 65 mm x 35 mm (12 in. x 2.6 in. x 1.4 in.)
Operating temperature 0–40°C (32–104°F)
Table 3. Factory default settings (continued)
Setting Value or Description