Quick Start Guide

ManualsBrandsNetgear ManualscomputerJNR1010v2

Quick Start

Package Contents

Front and Back Panels

N150 and N300 Wireless Routers

Router

(product appearance

varies by model)

Ethernet cable

(only available for

some models)

Power adapter

(varies by region)

Power LED

Internet LED WiFi LED

Ethernet LEDs 1–4

Ethernet ports 1–4

Internet port

Power

connector

WPS/Reset

button

1. Prepare your modem.

Unplug your modem’s power. Remove

the battery, if present.

2. Connect your modem.

Plug in your modem. Put the battery

back in. Then cable the modem to the

router’s Internet port.

3. Power on the router.

Connect the power adapter to the

router and plug the power adapter into

an electrical outlet.

The Power LED

lights green.

Wait for the WiFi LED

to light

green.

4. Connect a computer.

Use an Ethernet cable to connect your

computer to the Ethernet port on the

router.

You can also use WiFi to connect.

To connect with WiFi, use the WiFi

network name and password on the

product label.

5. Log in to the router.

Launch a web browser.

NETGEAR genie displays.

If you do not see genie, enter

www.routerlogin.net in the address

ﬁeld of the web browser . When

prompted, enter admin for the user

name and password for the password.

Follow the genie steps to connect to the

Internet.

DSL or cable

Internet

Ethernet cable

(only available for

some models)

Note: Product appearance varies by model.

Ethernet cable

(not included)

Power

adapter

Modem

6. Get the genie app.

Download the free genie app from

www.NETGEAR.com/genie.

Easily share media, ﬁles, and printers

on the network from your smartphone,

tablet, or laptop.

Router

Summary of content (2 pages)

PAGE 1
Quick Start 1. Prepare your modem. Unplug your modem’s power. Remove the battery, if present. 2. Connect your modem. Plug in your modem. Put the battery back in. Then cable the modem to the router’s Internet port. 3. Power on the router. Connect the power adapter to the router and plug the power adapter into an electrical outlet. The Power LED lights green. Wait for the WiFi LED green.
PAGE 2
WiFi Network Name and Password Join the Router’s WiFi Network The preset WiFi network name (SSID) and password (network key) are unique to your router, like a serial number. Because the router automatically uses WiFi security, you don’t need to set it up. The WiFi settings are on the product label. To connect your computer or WiFi device (such as a smartphone or gaming device) to your router’s WiFi network, you can use either the manual method or Wi-Fi Protected Setup (WPS) method. Manual Method 1.