Owner's Manual

Supplemental Information

114

N300 Wireless Gigabit Router with USB JNR3210

Factory Default Settings

Table 4. Router Default Settings

Feature Default Setting

Router Login URL http://www.routerlogin.net or ht

tp://www.routerlogin.com

WAN MAC address Default hardware address (on label)

MTU Size 1500

LAN IP address (gateway IP address) 192.168.1.1 (printed on product label)

Router subnet 255.255.255.0

DHCP server Enabled

DHCP range 192.168.1.2 to 192.168.1.254

Time zone GMT or other time zone settings based on your product SKU

Adjust for daylight saving time Disabled

Allow a registrar to configure this router Enabled

Wireless communication Enabled

Preset SSID NETGEARxx (xx refer to two random digits)

Security option passphrase Preset passphrase (see product label for details)

Wireless access list (MAC Filtering) All wireless stations allowed

Broadcast SSID Enabled

Transmission speed Auto

*. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary.

Network conditions and environmental factors, including volume of network traffic, building materials and

construction, and network overhead lower actual data throughput rate.

Country/Region United States in NA only, otherwise varies by country and region

RF channel auto until region selected

Operating mode 145 Mbps

Data rate Best

Output power Full

Inbound communication from the Internet Disabled (bars unsolicited requests except tra

ffic on port 80, the

http port)

Outbound communication to the Internet Enabled (all)