Owner's Manual

genie Basic Settings

N300 Wireless Gigabit Router with USB JNR3210

Guest Networks

Adding a guest network allows visitors at your home to use the Internet without giving them

your wireless security key.

 To set up a guest network:

1. Select Basic > Guest Network to displa

y the following screen:

2. Select any of the following wireless settings:

Enable Guest Network. W

hen this check box is selected, the guest network is enabled,

and guests can connect to your network using the SSID of this profile.

Enable Wireless Isolation.

If this check box is selected, then wireless clients (computers

or wireless devices) that join the network can use the Internet, but cannot access each

other or access Ethernet devices on the network.

Enable SSID Broadcast. If th

is check box is selected, the wireless access point

broadcasts its name (SSID) to all wireless stations. Stations with no SSID can adopt the

correct SSID for connections to this access point.

Allow guest to access My Local Network. If th

is check box is selected, any user who

connects to this SSID has access to your local network, not just Internet access.

3. Give the guest net

work a name.

The guest network name is case-sensitive and can be

up to 32 characters. You then

manually configure the wireless devices in your network to use the guest network name in

addition to the main nonguest SSID.

4. Select a se

curity option from the list. The security options are described in Guest Network

Wireless Security Options on p

age 27.

5. Click Apply to save

your selections.