Operation Manual

Supplemental Information
76
N150 and N300 Wireless Routers
Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or some other
similar object to press and hold the WPS/Reset button on the back panel of the router for at
least four seconds. The router resets, and returns to the factory settings that are shown in the
following table.
Table 4. Router factory default settings
Feature Default Behavior
Router login User login URL www.routerlogin.com or www.routerlogin.net
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
connection
WAN MAC address Use default hardware address
WAN MTU size 1500
Port speed AutoSensing
Local area
network (LAN)
LAN IP 192.168.1.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range 192.168.1.2 to 192.168.1.254
Time zone United States is Pacific Time; otherwise, varies by region
Time zone adjusted for daylight
saving time
Disabled