User Manual Nighthawk AX4 4-Stream AX1800 4G LTE WiFi Router Model LAX20 January 2021 202-12090-01 NETGEAR, Inc. 350 E.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Support and Community Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com. Regulatory and Legal Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à https://www.netgear.com/support/download/. (If this product is sold in Canada, you can access this document in Canadian French at https://www.netgear.
Contents Chapter 1 Hardware Setup Unpack your router...............................................................................9 Top panel LEDs and buttons.............................................................10 Rear panel............................................................................................12 Router label.........................................................................................13 Attach and position the antennas...............................................
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Set up an IPv6 fixed Internet connection....................................35 Set up an IPv6 DHCP Internet connection..................................36 Set up an IPv6 PPPoE Internet connection..................................37 Use auto config for an IPv6 Internet connection........................39 Set up an IPv6 6rd Internet connection.......................................41 Manage the MTU size............................................................
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Set up a bridge for a VLAN tag group........................................79 Set up an IPTV port........................................................................80 Manage custom static routes............................................................82 Set up a static route.......................................................................82 Edit a static route...........................................................................
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Specify ReadyDLNA media server settings...................................113 Return the router to its factory default settings............................114 Use the Reset button...................................................................114 Erase the settings.........................................................................114 Chapter 8 Share USB Storage Devices Attached to the Router USB device requirements......................................
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Chapter 11 Manage port forwarding and port triggering Manage port forwarding to a local server.....................................145 Set up port forwarding to a local server...................................145 Add a custom port forwarding service.....................................146 Edit a port forwarding service....................................................147 Delete a port forwarding entry..................................................
1 Hardware Setup This chapter contains the following sections: • • • • • • • • • Unpack your router Top panel LEDs and buttons Rear panel Router label Attach and position the antennas Position your router Wall-Mount Your Router Cable your router and connect it to a modem Set up the LAX20 using a SIM card For more information about the topics covered in this manual, visit the support website at netgear.com/support.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Unpack your router Your package contains the router, the power adapter, four antennas, and an Ethernet cable. Figure 1.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Top panel LEDs and buttons The status LEDs and two buttons are located on the top panel of the router. Figure 2. Top view Table 1. LED descriptions LED and Button Description Power LED • Solid white. The router is ready. • Blinking white. The router is not ready, firmware is upgrading, or the Reset button was pressed. • Off. Power is not supplied to the router. Internet LED • Solid red. No connection. • Solid blue. Ethernet WAN. • Solid green.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Table 1. LED descriptions (Continued) LED and Button Description Ethernet LEDs for ports 1–4 The LED color indicates the speed: white for Gigabit Ethernet connections and amber for 100 Mbps or 10 Mbps Ethernet connections. • Solid white. The router detected a 1 Gbps link with a powered-on device. • Blinking white. The port is sending or receiving traffic at 1 Gbps. • Solid amber. The router detected a 100 Mbps or 10 Mbps link with a powered-on device.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Rear panel The following figure shows the rear panel connectors and buttons. 1 2 3 4 5 6 7 Figure 3. Rear panel The rear panel contains the following components: 1. SIM slot. Allows insertion of the Nano-SIM (4FF) card provided by the Operator. 2. USB 2.0 port. Use the USB 2.0 port to connect a USB storage device. 3. Ethernet ports. Four Gigabit Ethernet RJ-45 LAN ports. Use these ports to connect LAN devices to the router. 4. WAN port.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Router label The router label shows the login information, WiFi network name (SSID), password, serial number, and MAC address. Figure 4. Router label Attach and position the antennas Before you install your router, attach the antennas to the router. Note: Make sure to match the labels on the antennas with the labels on the router. The antennas must be attached to the correct antenna post on the router.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Position your router The router lets you access your network anywhere within the operating range of your WiFi network. However, the operating distance or range of your WiFi connection can vary significantly depending on the physical placement of your router.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Wall-Mount Your Router You can wall-mount your router using the wall-mounting holes on the bottom of your router. Note: We recommend using M3 x 20 mm screws. Figure 6. Bottom of the router To wall-mount your router: 1. Drill holes in the wall where you want to wall-mount your router. 2. Insert wall anchors in the holes. 3. Insert screws into the wall anchors, leaving 3/16 inch (0.5 cm) of each screw exposed. 4.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Cable your router and connect it to a modem Power on your router and connect it to a modem. Figure 7. Cable your router To cable your router: 1. Unplug your modem, remove and reinsert the backup battery if it uses one, and then plug the modem back in. 2. Use the Ethernet cable to connect the modem to the yellow Internet port on the router.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Figure 8. Setup using a SIM card To set up your router using the SIM card provided by the Operator: 1. Insert the provided SIM card into the SIM slot on the router. 2. Connect the power adapter to your router and plug the power adapter into an outlet. 3. Press the Power On/Off button on the rear panel of the router. The router’s Power LED lights solid white when the router is ready.
2 Connect to the network and access the router You can connect to the router’s WiFi networks or use a wired Ethernet connection. This chapter explains the ways you can connect and how to access the router and log in.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Connect to the network You can connect to the router’s network through a wired or WiFi connection. If you set up your computer to use a static IP address, change the settings so that it uses Dynamic Host Configuration Protocol (DHCP). Connect to the network using a wired connection You can connect your computer to the router using an Ethernet cable and join the router’s local area network (LAN). To connect your computer to the router with an Ethernet cable: 1.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 4. Within two minutes, on your WPS-enabled device, press its WPS button or follow its instructions for WPS connections. Your WPS-enabled device connects to the WiFi network. Types of logins Separate types of logins serve different purposes. It is important that you understand the differences so that you know which login to use when. Several types of logins are associated with the router: • ISP login.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router When your Internet service starts, your Internet service provider (ISP) typically gives you all the information needed to connect to the Internet.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router • If the computer is set to a static or fixed IP address (this setting is uncommon), change it to obtain an IP address automatically from the router. 6. If the router does not connect to the Internet, do the following: a. Review your settings. Make sure that you selected the correct options and typed everything correctly. b. Contact your ISP to verify that you are using the correct configuration information. c. Read You cannot access the Internet on page 158.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router To install your router using the Nighthawk app: 1. To download the app, visit Nighthawk-app.com. 2. On your mobile device, tap Settings > Wi-Fi and find and connect to your router’s WiFi network. Your router’s WiFi network name (SSID) and network key (WiFi password) are on the router label. If the label includes a QR code, you can scan the QR code to join the router’s WiFi network. 3. Launch the Nighthawk app on your mobile device. 4.
3 Specify Your Internet Settings Usually, the quickest way to set up the router to use your Internet connection is to allow your router to detect the Internet connection automatically when you first access the router web interface. You can also customize and manually specify your Internet settings.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Use the Internet Setup Wizard You can use the Setup Wizard to detect your Internet settings and automatically set up your router. The Setup Wizard is not the same as the pages that display the first time you connect to your router to set it up. To use the Setup Wizard: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select Internet. The Internet Setup page displays. 5. In the Does your Internet connection require a login? section, leave the No radio button selected. 6.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 12. Click the Test button to test your Internet connection. If the NETGEAR website does not display within one minute, see You cannot access the Internet on page 158. Specify an Internet connection that uses a login To view or change the basic Internet setup: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router • Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP automatically assigns these addresses. • Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP address that your ISP assigned. The gateway is the ISP router to which your router connects. 13. Select a Domain Name Server (DNS) Address radio button: • Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 4. Select Basic > Internet. 5. In the APN field, enter the APN. 6. Click the Apply button. You have successfully configured an APN for your 4G LTE Router. Change the 4G LTE IP address range The 4G LTE router is preconfigured to use private IP addresses on the LAN side. The devices's default LAN IP configuration is as follows: • LAN IP address. 192.168.5.1 • Subnet mask. 255.0.0.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router This topic provides steps on how to enable SIM PIN security on your 4G LTE modem or mobile router. Note: You must enter your devices default PIN in order to enable SIM PIN security. If you do not know your SIM PIN or if your SIM card did not come with a PIN, contact your mobile service provider for assistance or try any of the following: • 0000 • 1111 • 1234 • The last four digits of the phone number that is associated with the SIM card.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router To set up an IPv6 Internet connection: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > IPv6. The IPv6 page displays. 5. From the Internet Connection Type menu, select Auto Detect. The page adjusts.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Set up an IPv6 6to4 tunnel Internet connection The remote relay router is the router to which your router creates a 6to4 tunnel. Make sure that the IPv4 Internet connection is working before you apply the 6to4 tunnel settings for the IPv6 connection. To set up an IPv6 Internet connection by using a 6to4 tunnel: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 8. (Optional) Select the Use This Interface ID check box and specify the interface ID to be used for the IPv6 address of the router’s LAN interface. If you do not specify an ID here, the router generates one automatically from its MAC address. 9. Select an IPv6 Filtering radio button: • Secured. In secured mode, which is the default mode, the router inspects both TCP and UDP packets. • Open. In open mode, the router inspects UDP packets only. 10.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Set up an IPv6 fixed Internet connection To set up a fixed IPv6 Internet connection: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 8. In the IPv6 Address/Prefix Length fields, specify the static IPv6 address and prefix length of the router’s LAN interface. If you do not specify an ID here, the router generates one automatically from its MAC address. 9. Select an IPv6 Filtering radio button: • Secured. In secured mode, which is the default mode, the router inspects both TCP and UDP packets. • Open. In open mode, the router inspects UDP packets only. 10. Click the Apply button.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. 6. (Optional) In the User Class (If Required) field, enter a host name. Most people can leave this field blank, but if your ISP gave you a specific host name, enter it here. 7. (Optional) In the Domain Name (If Required) field, enter a domain name. You can type the domain name of your IPv6 ISP.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > IPv6. The IPv6 page displays. 5. From the Internet Connection Type menu, select PPPoE. The page adjusts.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router • Auto Config. This is the default setting. This setting specifies how the router assigns IPv6 addresses to the devices on your home network (the LAN). 10. (Optional) Select the Use This Interface ID check box and specify the interface ID to be used for the IPv6 address of the router’s LAN interface. If you do not specify an ID here, the router generates one automatically from its MAC address. 11. Select an IPv6 Filtering radio button: • Secured.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. • Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired for the router’s LAN interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. 6.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Set up an IPv6 6rd Internet connection The 6rd protocol makes it possible to deploy IPv6 to sites using a service provider’s IPv4 network. 6rd uses the service provider’s own IPv6 address prefix. This limits the operational domain of 6rd to the service provider’s network and is under direct control of the service provider. The IPv6 service provided is equivalent to native IPv6.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. 6. Select an IPv6 Domain Name Server (DNS) Address radio button: • Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns this address. • Use These DNS Servers. If you know that your ISP requires specific servers, select this option.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router lower maximum transmission unit (MTU) setting than the other devices, the data packets must be split or “fragmented” to accommodate the device with the smallest MTU. The best MTU setting for NETGEAR equipment is often the default value. In some situations, changing the value fixes one problem but causes another.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Table 2. Common MTU sizes (Continued) MTU Application 1458 Used in PPPoA environments. 1436 Used in PPTP environments or with VPN. Change the MTU size To change the MTU size: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin.
4 Control Access to the Internet The router comes with a built-in firewall that helps protect your home network from unwanted intrusions from the Internet.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Enable access control to allow or block access to the Internet You can use access control to block or allow access to the Internet through your router. To set up access control: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router The list displays. 8. To allow the WiFi-enabled computer or mobile device you’re currently using to continue to access the Internet, select the check box next to your computer or device, and click the Allow button. 9. Click the Apply button. Your settings are saved. Use keywords to block Internet sites You can use keywords to block certain Internet sites from your network. You can use blocking all the time or based on a schedule.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router For example: • Specify XXX to block http://www.badstuff.com/xxx.html. • Specify the domain suffix (for example, .com) if you want to block only sites with a domain suffix such as .com. In such a situation, sites with domain suffixes such as .edu and .gov are still allowed. • Enter a period (.) to block all Internet browsing access. 7. Click the Add Keyword button. The keyword is added to the keyword list. The keyword list supports up to 32 entries. 8.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Block services from the Internet You can block Internet services on your network based on the type of service. You can block the services all the time or based on a schedule. Note: Service blocking only works for website URLs that begin with http:// only. It does not work for URLs that begin with https://. To block services: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router publisher of the application, ask user groups or newsgroups, or search on the Internet. 9. Select a filtering option: • Only This IP Address. Block services for a single computer. • IP Address Range. Block services for a range of computers with consecutive IP addresses on your network. • All lP Addresses. Block services for all computers on your network. 10. Click the Add button. Your settings are saved.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Prevent blocking on a trusted computer You can exempt one trusted computer from blocking. The computer that you exempt must be assigned a fixed IP address. You can use the reserved IP address feature to specify the IP address. See Manage reserved LAN IP addresses on page 62. To specify a trusted computer: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router The BASIC Home page displays. 4. Select ADVANCED > Security > Access Control. The Access Control page displays. 5. Select the Turn on Access Control check box. 6. Click the View list of allowed devices not currently connected to the network link. The list displays. 7. Select the check box for a device. 8. Use the Add button, Edit button, and Remove from the list button as needed. 9. Click the Apply button. Your settings are saved.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router • Time of Day to Block. Select a start and end time in 24-hour format, or select the All Day check box for 24-hour blocking. 6. Select your time zone from the menu. 7. If you live in a region that observes daylight saving time, select the Automatically adjust for daylight savings time check box. 8. Click the Apply button. Your settings are saved. Set up security event email notifications The router can email you its logs of router activity.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 9. In the Outgoing Mail Server Port Number field, enter a port number in the field. If you do not know the port number, leave the default port number. 10. If your outgoing email server requires authentication, select the My Mail Server requires authentication check box, and do the following: a. In the User Name field, type the user name for the outgoing email server. b. In the Password field, type the password for the outgoing email server. 11.
5 Manage Network Settings You can customize the router’s network settings. We recommend that you install the router and connect it to the Internet before you change its network settings.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router View or change the WAN settings You can view or configure wide area network (WAN) settings for the Internet port. You can set up a DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and enable the router to respond to a ping to its WAN (Internet) port. To view or change the WAN settings: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router • Disable SIP ALG. Some voice and video communication applications do not work well with the SIP ALG. Disabling the SIP ALG might help your voice and video applications to create and accept a call through the router. • VPN Passthrough. VPN connects two secure networks over the Internet. The router supports VPN passthrough for IPSec, PPTP, and L2TP. 5. Click the Apply button. Your settings are saved.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router The WAN Setup page displays. 5. Select the Default DMZ Server check box. 6. Type the IP address. 7. Click the Apply button. Your settings are saved. Change the Router’s Device Name The router’s default device name is based on its model number. This device name displays in the file manager when you browse your network. To change the router’s device name: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router These addresses are part of the designated private address range for use in private networks and are suitable for most applications. If your network requires a different IP addressing scheme, you can change these settings. You might want to change these settings if you need a specific IP subnet that one or more devices on the network use, or if you use competing subnets with the same IP scheme. To change the LAN TCP/IP settings: 1.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router • RIP-2. This format carries more information. Both RIP-2B and RIP-2M send the routing data in RIP-2 format. RIP-2B uses subnet broadcasting. RIP-2M uses multicasting. 8. Click the Apply button. Your settings are saved. If you changed the LAN IP address of the router, you are disconnected when this change takes effect. 9. To reconnect, close your browser, relaunch it, and log in to the router.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 6. Specify the range of IP addresses that the router assigns: a. In the Starting IP Address field, type the lowest number in the range. This IP address must be in the same subnet as the router. b. In the Ending IP Address field, type the number at the end of the range of IP addresses. This IP address must be in the same subnet as the router. 7. Click the Apply button. Your settings are saved.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router The LAN Setup page displays. 5. Clear the Use Router as DHCP Server check box. 6. Click the Apply button. Your settings are saved. 7. (Optional) If this service is disabled and no other DHCP server is on your network, set your computer IP addresses manually so that the computers can access the router.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 8. Click the Apply button. The reserved address is entered into the table. The reserved address is not assigned until the next time the computer contacts the router’s DHCP server. Reboot the computer, or access its IP configuration and force a DHCP release and renew. Edit a reserved IP address To edit a reserved address entry: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Setup > LAN Setup. The LAN Setup page displays. 5. Select the radio button next to the reserved address that you want to delete. 6. Click the Delete button. The address is removed.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router The WPS process automatically sets up yourr WPS-enabled device with the network password when it connects. The router WPS page displays a confirmation message. Specify basic WiFi settings The router comes with preset security. This means that the WiFi network name (SSID), network key (password), and security option (encryption protocol) are preset in the factory. You can find the preset SSID and password on the router label.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 7. To change the network name (SSID), type a new name in the Name (SSID) field. The name can be up to 32 characters long and it is case-sensitive. The default SSID is randomly generated and is on the router label. If you change the name, make sure to write down the new name and keep it in a safe place. 8. To change the WiFi channel, select a number from the Channel menu. In some regions, not all channels are available.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Change the WiFi mode if AX WiFi is enabled To change the WiFi mode settings if AX WiFi is enabled: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time you logged in. The user name and password are case-sensitive.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router limits 802.11ax devices to functioning at up to 1920 Mbps. This mode is the default mode. • Up to 3840 Mbps. This mode allows 802.11ax, 802.11ac, 802.11n, and 802.11a devices to join the selected WiFi network in the 5 GHz band of the network and allows 802.11ax devices to function at up to 3840 Mbps. 7. Click the Apply button. Your settings are saved. Change the WiFi mode if AX WiFi is disabled To change the WiFi mode settings if AX WiFi is disabled: 1.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 6. In the Wireless Network (5 GHz a/n/ac/ax) section, select a WiFi mode from the Mode menu. • Up to 346 Mbps. This mode allows 802.11ax, 802.11ac, 802.11n, and 802.11a devices to join the selected WiFi network in the 5 GHz band of the network but limits 802.11ax, 802.11ac, and 802.11n devices to functioning at up to 346 Mbps. • Up to 800 Mbps. This mode allows for reduced interference with neighboring WiFi networks. This mode allows 802.11ax, 802.11ac, 802.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router The Wireless Settings page displays. 5. In the Wireless Network (2.4 GHz b/g/n) section, select a percentage from the Transmit Power Control menu. 6. In the Wireless Network (5 GHz a/n/ac) section, select a percentage from the Transmit Power Control menu. 7. Click the Apply button. Your settings are saved. Change the WiFi password or the WiFi security The WiFi password is different from the admin password that you use to log in to the router.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 6. To change the WiFi security for the 2.4 GHz or 5 GHz WiFi network, select a Security Options radio button. • None. An open WiFi network that does not provide any security. Any WiFi device can join the WiFi network. We recommend that you do not use an open WiFi network. • WPA2-PSK [AES]. This option is the default setting. This type of security enables WiFi devices that support WPA2 to join the router’s WiFi network.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router By default, these networks are configured as open networks without security but are disabled. You can enable one or both networks. You can also change the SSIDs for these networks. To set up a guest network: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router • WPA2-PSK [AES]. WPA2 provides a secure and fast connection but some older WiFi devices do not detect WPA2 and support only WPA. Select WPA2-PSK [AES] security to allow 802.11n devices to connect to the 2.4 GHz or 5 GHz guest WiFi network at the fastest speed. If your network includes older devices that do not support WPA2, select WPA-PSK [TKIP] + WPA2-PSK [AES] security.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router To enable or disable the WiFi radios: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 5. Click the Add a new period button. The page adjusts. 6. Use the menus, radio buttons, and check boxes to set up a period during which you want to turn off the WiFi signal. 7. Click the Apply button. The Wireless Settings page displays. 8. Select the Turn off wireless signal by schedule check box to activate the schedule. 9. Click the Apply button. Your settings are saved.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router By default, the Keep Existing Wireless Settings check box is selected. We recommend that you leave this check box selected. If you clear this check box, the next time a new WiFi client uses WPS to connect to the router, the router WiFi settings change to an automatically generated random SSID and security key. 7. Click the Apply button. Your settings are saved.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router • Get dynamically from existing router. The other router on the network assigns an IP address to this router while it is in AP mode. • Use fixed IP settings on this device (not recommended). Use this setting if you want to manually assign a specific IP address to this router while it is in AP mode. Using this option effectively requires advanced network experience.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router To configure a port group and enable the bridge: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Set up a bridge for a VLAN tag group If the devices that are connected to the router’s Ethernet LAN ports or WiFi network include an IPTV device, your ISP might require you to set up a bridge for a VLAN tag group for the router’s Internet interface. If you are subscribed to IPTV service, the router might require VLAN tags to distinguish between the Internet traffic and the IPTV traffic.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 10. Click the Add button. The Add VLAN Rule page displays. 11. Specify the following settings for the VLAN tag group: • Name. Enter a name for the VLAN tag group. The name can be up to 10 characters. • VLAN ID. Enter a value from 1 to 4094. • Priority. Enter a value from 0 to 7. 12. Select the check box for a wired Ethernet port or wireless network.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 3. Enter the router user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > VLAN/IPTV Setup. The VLAN/IPTV Setup page displays. 5. Select the Enable VLAN/IPTV Setup check box. The page expands. 6. Select ADVANCED > Advanced Setup > VLAN/Bridge Settings.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Manage custom static routes Typically, you do not need to add static routes unless you use multiple routers or multiple IP subnets on your network. As an example of when a static route is needed, consider the following case: • Your main Internet access is through a cable modem to an ISP. • Your home network includes an ISDN router for connecting to the company where you are employed. This router’s address on your LAN is 192.168.1.100.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 4. Select ADVANCED > Advanced Setup > Static Routes. The Static Routes page displays. 5. Click the Add button. The page adjusts. 6. In the Route Name field, type a name for this static route (for identification purposes only). 7. To limit access to the LAN only, select the Private check box. If the Private check box is selected, the static route is not reported in RIP. 8. To prevent the route from becoming active, clear the Active check box.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > Static Routes. The Static Routes page displays. 5. In the table, select the radio button for the route. 6. Click the Edit button. The Static Routes page adjusts. 7. Edit the route information. 8. Click the Apply button. Your settings are saved.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Enable or disable implicit beamforming Implicit beamforming means that the router can use information from WiFi clients that support beamforming to improve the WiFi signal. To enable or disable implicit beamforming: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > Wireless Settings. The Wireless Settings page displays. 5. Scroll down below the WPS Settings section and select or clear the Enable MU-MIMO check box.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router The Wireless Setup page displays. 5. Select or clear the Enable AX check box. Selecting this check box turns on AX WiFi and clearing this check box turns off AX WiFi. 6. Click the Apply button. Your settings are saved. Enable bridge mode You can use your router in bridge mode to connect multiple devices at the faster WiFi speed. You need two routers: one set up as a router and the other set up as a bridge.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 5. Select the use other operation mode check box. 6. Select the Enable Bridge Mode radio button. 7. Click the setup bride mode wireless settings button. The Wireless Settings window opens. 8. Specify the settings of the other router to which this router will connect: a. Select the wireless network from the menu: • Wireless Networks (2.4Ghz b/g/n) • Wireless Networks (5Ghz a/n/ac) For 802.11ac or 802.11ax mode, select 5 GHz. b.
6 Optimize Performance You can set up the router to optimize performance for applications such as Internet gaming, high-definition video streaming, and VoIP communication. By default, the router uses Wi-Fi Multimedia Quality of Service (WMM QoS).
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Use Dynamic QoS to optimize Internet traffic management Dynamic Quality of Service (QoS) helps improve your router’s Internet traffic management capabilities through better application and device identification, bandwidth allocation, and traffic prioritization techniques. Dynamic QoS resolves traffic congestion when the Internet bandwidth is limited and different demands compete for bandwidth.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router • I want to define my Internet Bandwidth. If you know what your download and upload speed are, select this radio button and enter your download and upload speeds in the fields. 7. Click the Apply button. Your settings are saved. Enable or disable the automatic QoS database update The router uses a QoS database of the most popular applications and services to implement Dynamic QoS. By default, the router automatically updates this database.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router To manually update the Dynamic QoS database: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select QoS.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > UPnP. The UPnP page displays. 5. Select the Turn UPnP On check box. By default, this check box is selected. UPnP for automatic device configuration can be enabled or disabled.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router benefits of WMM QoS, WMM must be enabled for both it and the client running that application. Legacy applications that do not support WMM and applications that do not require QoS are assigned to the best effort category, which receives a lower priority than voice and video. Note: We recommend that you do not disable the WMM settings. If you disable the WMM settings for 2.4 GHz or 5 GHz, the maximum link rate your router can reach is 54 Mbps.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router To enable or disable AX WiFi: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select Wireless.
7 Manage Your Router This chapter describes the router settings for administering and maintaining your router and home network.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Update the router firmware You can log in to the router and check if new firmware is available, or you can manually load a specific firmware version to your router. Check for new firmware and update the router The router firmware (routing software) is stored in flash memory. You might see a message at the top of the router pages when new firmware is available.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router When the upload is complete, your router restarts. The update process typically takes about one minute. Read the new firmware release notes to find out if you must reconfigure the router after updating. Manually upload firmware to the router If you want to upload a specific firmware version, or your router fails to update its firmware automatically, follow these instructions.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Note: To avoid the risk of corrupting the firmware, do not interrupt the update. For example, do not close the browser, click a link, or load a new page. Do not turn off the router. Wait until the router finishes restarting. If your router does not reboot, check the Router Status page to confirm whether the new firmware version uploaded. Change the admin password The admin password is the one you specified the first time you logged in.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router To enable password recovery: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 7. Click the Continue button. A window opens and displays your recovered password. 8. Click the Login again button. A login window opens. 9. With your recovered password, log in to the router. View information about the router and the Internet and WiFi settings You can view router information, the Internet port status, and WiFi settings. To view information about the router and the Internet, modem, and WiFi settings: 1.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Display the statistics of the Internet port To display the statistics of the Internet port: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 6. To change the polling frequency, enter a time in seconds in the Poll Interval field and click the Set Interval button. To stop the polling entirely, click the Stop button. Check the Internet connection status To check the Internet connection status: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 6. To release (stop) the Internet connection, click the Release button. 7. To renew (restart) the Internet connection, click the Renew button. 8. To exit the screen, click the Close Window button. View and manage logs of router activity The logs are a detailed record of the websites you accessed or attempted to access and many other router actions. Up to 256 entries are stored in the log. To view and manage logs: 1.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router You must set up email notifications in order to receive the logs. The router to emails the logs to the address that you specified when you set up email notifications. For more information, see Set up security event email notifications on page 53. 9. Click the Apply button. Your settings are saved. View devices currently on the network You can view all computers and devices that are currently connected to your network. To view devices on the network: 1.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router To monitor Internet traffic: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 10. Click the Apply button. The Internet Traffic Statistics section helps you to monitor the data traffic. 11. To update the Traffic Statistics section, click the Refresh button. 12. To display more information about the data traffic on your router and to change the poll interval, click the Traffic Status button. Manage the router configuration file The configuration settings of the router are stored within the router in a configuration file.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router To erase the settings: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Administration > Backup Settings.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router The file is uploaded to the router and the router restarts. WARNING: Do not interrupt the restoration process. Manage remote access You can access your router over the Internet to view or change its settings. You must know the router’s WAN IP address to use this feature. Note: Be sure to change the password for the user name admin to a secure password.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router • Only This Computer. Allow access from a single IP address on the Internet. Enter the IP address to be allowed access. • IP Address Range. Allow access from a range of IP addresses on the Internet. Enter a beginning IP address and an ending IP address to define the allowed range. • Everyone. Allow access from any IP address on the Internet. 7. Specify the port number for accessing the router web interface.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Turn off the router LEDs The LEDs on the front panel of the router indicate activities and behavior. You can turn off all LEDs except the Power LED. To turn off the LEDs: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router The NTP Settings page displays. 5. Select your time zone from the menu. 6. If you live in a region that observes daylight saving time, select the Automatically adjust for daylight savings time check box. 7. Click the Apply button. Your settings are saved.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Specify ReadyDLNA media server settings By default, the router acts as a ReadyDLNA media server, which lets you view movies and photos on DLNA/UPnP AV-compliant media players, such as Xbox360, Playstation, and NETGEAR media players. To specify media server settings: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Return the router to its factory default settings Under some circumstances (for example, if you lost track of the changes that you made to the router settings or you move the router to a different network), you might want to erase the configuration and reset the router to factory default settings. To reset the router to factory default settings, you can use either the Reset button on the back of the router or the Erase function.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router To erase the settings: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Administration > Backup Settings.
8 Share USB Storage Devices Attached to the Router This chapter describes how to access and manage storage devices attached to your router. ReadySHARE lets you access and share USB storage devices connected to the router. (If your storage device uses special drivers, it is not compatible.) Note: You can use a USB port on the router to connect a USB storage device like a flash drive or hard drive. Do not connect a computer, USB modem, CD drive, or DVD drive to a USB port on the router.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router USB device requirements The router works with most USB-compliant external flash and hard drives. For the most up-to-date list of USB devices that the router supports, visit kb.netgear.com/app/answers/detail/a_id/18985/~/readyshare-usb-drives-compatibility-list. Some USB external hard drives and flash drives require you to load the drivers onto the computer before the computer can access the USB storage device.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Access a storage device connected to the router from a Windows-based computer To access the USB storage device from a Windows-based computer: 1. Connect a USB storage device to a USB port on your router. 2. If your USB storage device uses a power supply, connect it. You must use the power supply when you connect the USB storage device to the router.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 6. Right-click the USB device and select Map network drive. The Map Network Drive window opens. 7. Select the drive letter to map to the new network folder. 8. Click the Finish button. The USB storage device is mapped to the drive letter that you specified. 9. To connect to the USB storage device as a different user, select the Connect using different credentials check box, click the Finish button, and do the following: a. Type the user name and password. b.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 6. Click the Connect button. A window automatically opens and displays the files and folders on the USB storage device. Enable FTP access within your network File Transfer Protocol (FTP) lets you download (receive) and upload (send) large files faster. To enable FTP access within your network: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router To view network folders: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > USB Storage > ReadySHARE.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Add a network folder on a USB storage device You can add network folders on a USB storage device connected to a router USB port. To add a network folder: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router All–no password (the default) allows all users to access the network folder. The other option is that only the admin user is allowed access to the network folder. The password for admin is the same one that you use to log in to the router. 12. Click the Apply button. The folder is added on the USB storage device. 13. Click the Close Window button. The window closes.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 10. Click the Apply button. Your settings are saved. Safely remove a USB storage device Before you physically disconnect a USB storage device from the router USB port, log in to the router and take the USB storage device offline. To remove a USB storage device safely: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3.
9 Use Dynamic DNS to Access USB Storage Devices Through the Internet With Dynamic DNS, you can use the Internet to access a USB device that's connected to a USB port on the router when you’re not home.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Set up and manage Dynamic DNS Internet service providers (ISPs) assign numbers called IP addresses to identify each Internet account. Most ISPs use dynamically assigned IP addresses. This means that the IP address can change at any time. You can use the IP address to access your network remotely, but most people don’t know what their IP addresses are or when this number changes.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 8. To limit access to the admin user, select a device in the Available Network Folder's section. If only one device is connected, it is automatically selected. 9. Click the Edit button. The Edit page displays. 10. In the Read Access menu, select admin. 11. In the Write Access menu, select admin. 12. Click the Apply button. Your settings are saved.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 5. Set up FTP access in the router. See Set up FTP access through the Internet on page 126. 6. On a remote computer with Internet access, you can use FTP to access your router using ftp://yourname.mynetgear.com. Set up a new Dynamic DNS account To set up Dynamic DNS and register for a free NETGEAR account: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Specify a DNS account that you already created If you already created a Dynamic DNS account with NETGEAR, No-IP, or DynDNS, you can set up the router to use your account. To set up Dynamic DNS if you already created an account: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Change the Dynamic DNS settings You can change the settings for your Dynamic DNS account. To change your settings: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in.
10 Use VPN to Access Your Network You can use OpenVPN software to remotely access your router using virtual private networking (VPN). This chapter explains how to set up and use VPN access.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Set up a VPN connection A virtual private network (VPN) lets you use the Internet to securely access your network when you aren’t home. This type of VPN access is called a client-to-gateway tunnel. The computer is the client, and the router is the gateway. To use the VPN feature, you must log in to the router and enable VPN, and you must install and run VPN client software on the computer. VPN uses DDNS or a static IP address to connect with your router.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 6. To change the service type, scroll down and select the TCP radio button. 7. To change the port, scroll down to the Service Port field, and type the port number that you want to use. 8. Click the Apply button. Your changes are saved. VPN is enabled in the router, but you must install and set up OpenVPN software on your computer before you can use a VPN connection.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 9. In the Windows Installer section of the page, double-click the openVPN-install-xxx.exe link. 10. Download and install the Open VPN software on your computer, click the openVPN-install-xxx.exe file. 11. Click the Next button. 12. Read the License Agreement and click the I Agree button. 13. Leave the check boxes selected as shown, and click the Next button.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 14. To specify the destination folder, click the Browse button and select a destination folder. 15. Click the Install button. The window displays the progress of the installation and then displays the final installation page. 16. Click the Finish button. 17. Unzip the configuration files that you downloaded and copy them to the folder where the VPN client is installed on your device.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router c. Select the local area connection and change its name (not its device name) to NETGEAR-VPN. If you do not change the VPN interface name, the VPN tunnel connection will fail. For more information about using OpenVPN on your Windows computer, visit https://openvpn.net/index.php/open-source/documentation/howto.html#quick.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Install OpenVPN software on an iOS device You must install this software on each iOS device that you plan to use for VPN connections to your router. To install VPN client software on an iOS device: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router user name and password. The user name is admin.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router To install VPN client software on an Android device: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router established, you cannot access your home router or your home network with the OpenVPN software. The default LAN IP address scheme for the router is 192.x.x.x. The most common IP schemes are 192.x.x.x, 172.x.x.x, and 10.x.x.x. If you experience a conflict, change the IP scheme either for your home network or for the network with the client VPN computer. For information about changing these settings, see Change the LAN TCP/IP settings on page 58.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Use VPN to access the router’s USB device and media To access a USB device and download files from your Windows-based computer using VPN: 1. On your Windows-based computer, open the Windows file manager and select Network. Note: See your computer’s documentation for information about how to display the network resources. The network resources display.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Set up VPN client Internet access in the router By default, the router is set up to allow VPN connections only to your home network, but you can change the settings to allow Internet access. Accessing the Internet remotely through a VPN might be slower than accessing the Internet directly. To allow VPN clients to use your home Internet service: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router To allow VPN clients to access only your home network: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 4. When the VPN connection is established, launch your Internet browser.
11 Manage port forwarding and port triggering You can use port forwarding and port triggering to set up rules for Internet traffic. You need networking knowledge to set up these features.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Manage port forwarding to a local server If your home network includes a server, you can allow certain types of incoming traffic to reach the server. For example, you might want to make a local web server, FTP server, or game server visible and available to the Internet. The router can forward incoming traffic with specific protocols to computers on your local network.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router 11. Click the Add button. The service displays in the menu. Add a custom port forwarding service The router lists default services and applications that you can use in port forwarding rules. If the service or application is not predefined, you can add a port forwarding rule with a custom service or application. To add a custom service: 1. Find out which port number or range of numbers the application uses.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router You can enter a port range and fixed ports in one rule, for example, external (30–50, 78, 100–102), internal (40–60, 99, 200–202). With this rule, external ports 30–50 are forwarded to internal ports 40–60. 12. In the Internal IP address field, type the IP address or select the radio button for an attached device listed in the table. 13. Click the Apply button. The service is now in the list on the Port Forwarding/Port Triggering page.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Delete a port forwarding entry To delete a port forwarding entry: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router How the router implements the port forwarding rule The following sequence shows the effects of a port forwarding rule: 1. When you type the URL www.example.com in your browser, the browser sends a web page request message with the following destination information: • Destination address. The IP address of www.example.com, which is the address of your router. • Destination port number. 80, which is the standard port number for a web server process. 2.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Add a port triggering service To add a port triggering service: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Enable port triggering To enable port triggering: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router also allow incoming traffic on port 113 to reach the originating computer.” The following sequence shows the effects of this port triggering rule: 1. You open an IRC client program to start a chat session on your computer. 2. Your IRC client composes a request message to an IRC server using a destination port number of 6667, the standard port number for an IRC server process. Your computer then sends this request message to your router. 3.
12 Troubleshooting This chapter provides information to help you diagnose and solve problems you might experience with your router. If you do not find the solution here, check the NETGEAR support site at netgear.com/support for product and contact information.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Quick tips This section describes tips for troubleshooting some common problems. Sequence to restart your network If you must restart your network, follow this sequence: 1. Turn off and unplug the modem. 2. Turn off the router. 3. Plug in the modem and turn it on. Wait two minutes. 4. Turn on the router and wait two minutes.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Some Internet service providers require you to use the MAC address of the computer initially registered on the account, but this is an unusual situation. You can view the MAC address on the Attached Devices page of the router web interface. Troubleshoot with the LEDs By default, the router uses standard LED settings.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Power LED is off or blinking This could occur for a number of reasons. Check the following: • Make sure that the power adapter is securely connected to your router and securely connected to a working power outlet. • Make sure that you are using the power adapter that NETGEAR supplied for this product. • If the Power LED blinks slowly and continuously, the router firmware is corrupted.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router You cannot log in to the router If you are unable to log in to the router from a computer or mobile device on your local network, check the following: • If you are using an Ethernet-connected computer, check the cable connection between the computer and the router. • If you are using a WiFi-enabled computer or mobile device, check the WiFi connection between the computer or mobile device and the router.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router example, the router cannot convert ADSL or cable data into Ethernet networking information. NETGEAR does not support such a configuration. You cannot access the Internet If you can access your router but not the Internet, check to see if the router can obtain a WAN IP address from your Internet service provider (ISP). Unless your ISP provides a fixed IP address, your router requests an IP address from the ISP.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router • If your ISP allows only one Ethernet MAC address to connect to Internet and checks for your computer’s MAC address, do one of the following: - Inform your ISP that you bought a new network device and ask them to use the router’s MAC address. - Configure your router to clone your computer’s MAC address.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Changes are not saved If the router does not save the changes that you make in the router web interface, do the following: • When entering configuration settings, always click the Apply button before moving to another page or tab, or your changes are lost. • Click the Refresh or Reload button in the web browser. It is possible that the changes occurred, but the old settings might be in the web browser’s cache.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Troubleshoot your network using the ping utility Most network devices and routers contain a ping utility that sends an echo request packet to the designated device. The device then responds with an echo reply. You can easily troubleshoot a network using the ping utility in your computer or workstation. Test the LAN path to your router You can ping the router from your computer to verify that the LAN path to your router is set up correctly.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Test the path from a Windows-based computer to a remote device To test the path from a Windows-based computer to a remote device: 1. From the Windows toolbar, click the Start button and select Run. 2. In the Windows Run window, type ping -n 10 where is the IP address of a remote device such as your ISP DNS server.
13 Supplemental Information This chapter includes technical information about your router.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Factory Settings You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and hold the Reset button on the back of the router for at least seven seconds. The router resets and returns to the factory configuration settings shown in the following table. Table 3. Factory default settings Feature Router login Internet connection Local network (LAN) Default setting User login URL www.routerlogin.com or www.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Table 3. Factory default settings (Continued) Feature Wireless Default setting SSID name See router label Security WPA2-PSK (AES) Broadcast SSID Enabled Transmission speed Auto1 Country/region United States in the US; otherwise, varies by region RF channel Auto for 2.4 GHz, CH 44 for WW SKU, and CH 153 for North America SKU Operating mode Up to 600 Mbps at 2.
Nighthawk AX4 4-Stream AX1800 LTE WiFi Router Table 4. Router specifications (Continued) Feature Description WAN Compatible with 10BASE-T, 100BASE-TX, 1000BASE-T, or RJ-45 WiFi Maximum WiFi signal rate complies with the IEEE® 802.11 standard.2 • 2.4GHz AX: 2x2 up to 600 Mbps, 40/20MHz, 1024/256QAM • 5GHz AX: 2x2 up to 1200 Mbps,80/40/20 MHz 1024QAM • Backwards compatible with 802.11a/b/g/n/ac WiFi Radio data rates Auto Rate Sensing Data encoding standards IEEE 802.11ax 2.
CLEARW \Y Wireless for Business KEEP YOUR OWN DEVICE SIM KIT Nano I Micro I Standard Nationwide Coverage on One of America's Largest and Most Dependable Networks CWBYOPGCLTB28
Your NETGEAR LTE Router requires a SIM card . You may use your own, or the SIM card included from Clearway. To use the Clearway SIM card: Visit clearway.com/NETGEAR to select special offer data plans available with your NETGEAR LTE Router. Activate and insert SIM card. Use the appropriate NETGEAR app to install your NETGEAR LTE Router. Check out the special offer data plan rates at: clearway.com/NETGEAR CLEARW. \Y Wireless for Business deaiway.
if Thank You for Selecting Clearway Wireless for Business. r 0 t, Activate Now! It's as easy as - 1-2-3.
The advantages are clear
. __J MICRO NANO .
STEP 2: INSERT SIM For help inserting your SIM, go to SIMcardinsert.
STEP 3: ACTIVATE • Get your service started. Go to ActivateB2B.
NTATKTMT5B2B-TRI 6 111111111111111 16960 25519 112722 Wireless for Business ~ Ot:1 fY 2
