Nighthawk MR2100(Telstra) Quick Start Guide

ManualsBrandsNetgear ManualsComputers & AccessoriesNighthawk MR2100 4G Mobile Hotspot(Unlocked)

Quick Start

Next Gen Gigabit LTE Mobile Router

Support

For additional information, visit netgear.com/support to access the full user manual

and to download ﬁrmware updates.

Compliance

For the current EU Declaration of Conformity, visit

http://kb.netgear.com/app/answers/detail/a_id/11621.

For regulatory compliance information, visit:

http://www.netgear.com/about/regulatory/.

LCD Status Bar Icons

Signal strength 1 bar. Low signal

5 bars. Strong signal

Network type 4G+, 4G

HSPA+ /DC HSPA

Roaming Connected to a network other than your service

provider’s.

Trafﬁc • Outline. Connected

• Solid. Sending or receiving

• None. Not connected

Battery This icon is solid when the battery is fully charged.

Battery hot while

charging

The battery is hot, but is being charged.

Battery hot,

not charging

The battery is too hot and is not being charged.

Alert To view system alerts, visit the mobile router’s home page

at http://m2login.net.

Download the NETGEAR Mobile app

Use the NETGEAR Mobile app to change your WiFi network

name and password. You can also use it to play and share media,

and enable the travel router feature.

1. Connect your mobile device to the Internet.

2. Download the NETGEAR Mobile app from

netgear.com/mobileapps.

1. Launch a web browser from a device that is connected to the

Nighthawk M2 mobile router.

2. In the address ﬁeld of the web browser, enter http://m2login.net or

http://192.168.1.1.

3. In the Sign In ﬁeld, enter the admin password and click the Sign In button.

See the label located under the battery for the initial admin password. We

recommend that you change it to a password that you want to use.

Upload media ﬁles to the Nighthawk M2 mobile router

You can upload media ﬁles to a USB drive connected to the

Nighthawk M2 mobile router. USB drives are sold separately.

1. Log in to the Nighthawk M2 mobile router home page.

2. Click the MyMedia tab.

3. Drag and drop your ﬁles onto the page.

Use the Nighthawk M2 mobile router to charge devices

If the battery power is low on your smartphone or other device, you can give it a

boost by connecting it to the mobile router’s USB port (type A).

Jump boost begins automatically once the devices are connected. Note that Jump

boost is only supported when the mobile router contains a battery.

USB

(type A)

Speciﬁcations

Band Specication

LTE FDD 700/800/900/1800/2100/2600 MHz

LTD TDD 2300/2500/2600 MHz

850/900/1900/2100 MHz

trademarks are used for reference purposes only.

USB

(type C)

Antenna port

Ethernet port

(LAN or WAN)

Antenna port

Summary of content (2 pages)

PAGE 1
Download the NETGEAR Mobile app LCD Status Bar Icons Signal strength Network type Roaming Traffic 1 bar. Low signal 5 bars. Strong signal 4G+, 4G HSPA+ /DC HSPA 3G Connected to a network other than your service provider’s. • Outline. Connected • Solid. Sending or receiving • None. Not connected Battery Battery hot while charging This icon is solid when the battery is fully charged. The battery is hot, but is being charged. Battery hot, not charging The battery is too hot and is not being charged.
PAGE 2
Package contents Check the SIM card and insert the battery Set up the Nighthawk M2 mobile router • Nighthawk M2 mobile router 1. Locate the bottom cover in the envelope. 1. • Battery 2. • Quick start guide Check to see if a SIM card is in the SIM card slot. • Bottom cover 3. 2. • USB Type-C cable If a SIM card is not in the slot, locate the SIM card. • AC power adapter To get a valid and provisioned SIM card, contact your mobile provider.