User Manual
Table Of Contents
- M4100 Series Managed Switch
- Contents
- 1. Get Started
- 2. Configure System Information
- System Configuration
- Configure Initial Management VLAN Settings
- Define System Information
- View the Switch Status
- Manage Loopback Interfaces
- View the IPv6 Network Neighbor Table
- Configure an IPv4 Management VLAN
- View or Set the System Time
- Configure DNS
- Configure the DHCP Server
- Configure the DHCP Pool
- Configure UDP Relay Global Settings
- Configure the Basic PoE Settings
- Configure Advanced PoE Settings
- View All MIBs Supported by the Switch
- Configure SNMP v3 Settings for a User
- LLDP Overview
- Configure LLDP Global Settings
- Configure an LLDP Interface
- View LLDP Statistics
- View LLDP Local Device Information
- View LLDP Remote Device Information
- View LLDP Remote Device Inventory
- Configure LLDP-MED Global Settings
- Configure the LLDP-MED Interface
- View LLDP-MED Local Device Information
- View LLDP-MED Remote Device Information
- View LLDP-MED Remote Device Inventory
- ISDP Settings Overview
- Configure Timers
- 3. Configure Switching Information
- VLAN Overview
- Configure a Basic VLAN
- Configure an Internal VLAN
- Add a VLAN
- Reset VLAN Configuration
- Configure Internal VLAN Settings
- Configure VLAN Trunking
- Configure VLAN Membership
- View VLAN Status
- Configure Port PVID
- Configure a MAC-Based VLAN Group
- Configure a Protocol-Based VLAN Group
- Configure Protocol-Based VLAN Group Membership
- Configure an IP Subnet–Based VLAN
- Configure Port DVLAN
- Configure a Voice VLAN
- Configure GARP Switch Settings
- Configure GARP Port Settings
- Auto-VoIP Overview
- Spanning Tree Protocol Overview
- Configure Multicast
- IGMP Snooping Overview
- Configure MLD Snooping
- Configure MVR
- Manage MAC Addresses
- Configure Port Settings
- Link Aggregation Group Overview
- VLAN Overview
- 4. Routing
- 5. Configure Quality of Service
- QoS Overview
- Class of Service
- Differentiated Services
- DiffServ Wizard Overview
- Use the DiffServ Wizard
- Configure DiffServ
- Configure the Global Diffserv Mode
- Configure a DiffServ Class
- Configure the Class Match Criteria
- Configure a DiffServ IPv6 Class
- Configure the DiffServ Class Match Criteria
- Configure DiffServ Policy
- Configure DiffServ Policy Attributes
- Configure DiffServ Policy Settings on an Interface
- View Service Statistics
- 6. Manage Device Security
- Management Security Settings
- Configure RADIUS Settings
- TACACS
- Set Up a Login Authentication List
- Configure Management Access
- Manage Certificates
- Manage Telnet
- Port Authentication Overview
- Traffic Control
- Configure a Private Group
- Private VLAN Overview
- Storm Control Overview
- Control DHCP Snooping Settings
- Configure an IP Source Guard Interface
- Configure Dynamic ARP Inspection
- Access Control List Overview
- Use the ACL Wizard
- Create a MAC ACL
- Configure MAC Rules
- Configure ACL MAC Binding
- View or Delete MAC Bindings
- Configure an IP ACL
- Configure Rules for an IP ACL
- Configure IP Extended Rules
- Configure an IPv6 ACL
- Configure IPv6 Rules
- Configure ACL Interface Bindings
- View or Delete IP ACL Bindings
- View or Delete VLAN ACL Bindings
- 7. Monitoring the System
- 8. Maintenance
- A. Default Settings
- B. Configuration Examples
Configure System Information
105
M4100 Series Managed Switch
Media Application Type The application type. Types of applications are unknown,
voicesignaling, guestvoice, guestvoicesignalling,
softphonevoice, videoconferencing, streammingvideo,
and vidoesignalling. Each application type that is
received has the VLAN ID, priority, DSCP, tagged bit
status, and unknown bit status. A port can receive one or
many such application types. Only when a network policy
TLV was received on this port, is this information
displayed.
VLAN Id The VLAN ID associated with a particular policy type.
Priority The priority associated with a particular policy type.
DSCP The DSCP associated with a particular policy type.
Unknown Bit Status The unknown bit associated with a particular policy type.
Tagged Bit Status The tagged bit associated with a particular policy type.
Inventory Information: Specifies if the inventory TLV is received in LLDP frames on this port.
Hardware Revision The hardware version of the remote device.
Firmware Revision The Firmware version of the remote device.
Software Revision The Software version of the remote device.
Serial Number The serial number of the remote device.
Manufacturer Name The manufacturers name of the remote device.
Model Name The model name of the remote device.
Asset ID The asset ID of the remote device.
Location Information: Specifies if the location TLV is received in LLDP frames on this port.
Sub Type The type of location information.
Location Information The location information as a string for given type of
location ID.
Extended POE: Specifies if the remote device is a PoE device.
Device Type The remote device's PoE device type connected to this
port.
Extended POE PSE: Specifies if the extended PSE TLV is received in LLDP frame on this port.
Available The remote port’s PSE power value in tenths of watts.
Source The remote port’s PSE power source.
Priority The remote port’s PSE power priority.
Extended POE PD: Specifies if the extended PD TLV is received in LLDP frame on this port.
Table 30. LLDP-MED remote device information (continued)
Field Description