User Manual

Configure Switching Information
176
M4100 Series Managed Switch
The Interface field display all physical, VLAN, and LAG interfaces.
8. Select an interface.
9. In the Admin Mode list, select Disable or Enable.
This is the interface mode for the selected interface for MLD snooping for the switch. The
default is Disable.
10. In the Group Membership Interval (secs) field, specify the amount of time you want the
switch to wait for a report for a particular group on a particular interface before it deletes that
interface from the group.
The valid range is from (2 to 3600) seconds. The configured value must be greater than
Max Response Time. The default is 260 seconds.
11. In the Max Response Time (secs) field, specify the amount of time you want the switch to
wait after sending a query on an interface because it did not receive a report for a particular
group on that interface.
Enter a value greater or equal to 1 and less than the group membership interval in
seconds. The default is 10 seconds. The configured value must be less than the group
membership interval.
12. In the Present Expiration Time field, specify the amount of time you want the switch to wait
to receive a query on an interface before removing it from the list of interfaces with multicast
routers attached.
Enter a value between 0 and 3600 seconds. The default is 0 seconds. A value of zero
indicates an infinite time-out, for example no expiration.
13. In the Fast Leave Admin mode list, select Disable or Enable.
This sets the Fast Leave mode for a particular interface from the menu. The default is
Disable.
Configure a MLD VLAN
 To configure a MLD VLAN:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.