User Manual

Configure System Information
23
M4100 Series Managed Switch
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System
 Management System Information.
8. Define the following fields:
• System Name. Enter a name to identify this switch.
You can use up to 255
alphanumeric characters. The factory default is blank.
• System Location. Enter the location of this switch.
You can use up to 255
alphanumeric characters. The factory default is blank.
• System Contact. Enter the contact person for this switch.
You can use up to 25
alphanumeric characters. The factory default is blank.
• Login T
imeout. Specify how many minutes of inactivity can occur on a serial port
connection before the switch closes the connection. Enter a number between 0 and
160: the factory default is 5. Entering 0 disables the time-out.
• Management Interface — Select the management interface to be used as source
interface for SNMP trap, syslog, DNS,
TACACS+, RADIUS, sflow, and SNTP
applications. Possible values are as follows:
• Routing Interface
• Routing VLAN
• Routing Loopback Interface