User Manual

Configure System Information
36
M4100 Series Managed Switch
Once you establish in-band connectivity, you can change the IP information using any of the
following:
• Terminal interface through the EIA-232 port
• T
erminal interface through Telnet
• SNMP-based management
• W
eb-based management
 To configure the IPv4 management VLAN:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser
.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System > Management > Management Interfaces > IPv4 Management VLAN
Configuration.